Products

Metalworking

Guide de choix outils

Single-cut tap M ≈ 352 HSS ground

ULTIMATECUT twist drill DIN 338 Typ FLOWSTEP® HSS

ULTIMATECUT step drill HSS RUnaTEC with FLOWSTEP® tip

ULTIMATECUT Taper and deburring countersinker 4S HSS DIN 355 90°

Single-cut tap set HSS

Tungsten carbide hole saw, shallow cut

Screw-hole punches with three-point cutting tip

ULTIMATECUT Twist Drill Set DIN 338 Type FLOWSTEP® Point, HSSE-Co 5

ULTIMATECUT step drill bit set HSS RUnaTEC with FLOWSTEP® tip

Hand tap set HSS

Tungsten carbide hole saw, shallow cut

Set of screw-hole punches in plastic cases

Hand tap set M 352 HSSE-Co 5

ULTIMATECUT twist drill DIN 338 Typ FLOWSTEP® HSSE-Co 5

ULTIMATECUT step drill set with FLOWSTEP® tip HSS size no. 0/9, 1, 2 in REPACK by RUKO

ULTIMATECUT Taper and deburring countersinker 4S HSS RUnaTEC DIN 355 90°

Hand tap set HSS

Tungsten carbide multigrade hole saw MHS

Screw-hole punches with three-point cutting tip + ball bearing

ULTIMATECUT Twist Drill Set DIN 338 Type FLOWSTEP® Point, HSSE-Co 5

ULTIMATECUT step drill HSS RUnaTEC with FLOWSTEP® tip

ULTIMATECUT Taper and deburring countersinker set 4S HSS RUnaTEC DIN 335 90°

Hand tap set HSS

Bi-metal hole saw set HSS with varied toothing

Set of screw-hole punches with ball-bearing in plastic cases

ULTIMATECUT Countersink 4S HSSE-Co 5 DIN 355 90°

ULTIMATECUT Countersink set 4S HSSE-Co 5 DIN 335 90°

ULTIMATECUT Countersink 4S HSS-Co 5 RUnaTEC DIN 355 90°

ULTIMATECUT Countersink set 4S HSSE-Co 5 RUnaTEC DIN 335 90°

Twist drill DIN 338 type UNI, HSSE-Co 5

ULTIMATECUT step drill bit set HSS RUnaTEC with FLOWSTEP® tip

ULTIMATECUT Taper and deburring countersinker DIN 335 type C 90° HSS

Bi-metal hole saw HSS with varied toothing

Set of foot-operated hydraulic punch in plastic case

Twist drill set DIN 338 type UNI, HSSE-Co 5

ULTIMATECUT step drill set with FLOWSTEP® tip HSS size no. 0/9, 1, 2 in REPACK by RUKO

ULTIMATECUT Taper and deburring countersinker set (DIN 335) type C 90° HSS in plastic case

Set of bi-metal hole saws HSS in plastic cases

Set of manual hydraulic punch in plastic case

Twist drill DIN 338 type N, HSS-G

ULTIMATECUT Multidrill HSS RUnaTEC, spiral fluted with turbo tip

ULTIMATECUT Taper and deburring countersinker DIN 335 type C 90° HSS RUnaTEC

Bi-metal hole saw HSSE-Co 8 with fine toothing

Distance sleeve

Twist drill set DIN 338 type N, HSS-G

ULTIMATECUT Multidrill-Satz HSS RUnaTEC in Kunststoffkassette

ULTIMATECUT Taper and deburring countersinker set (DIN 335) type C 90° HSS RUnaTEC in plastic case

Set of bi-metal hole saws HSSE-Co 8 in plastic cases

Adapter bolt MF 10 x 1,0, 3/4" UNF fitting

ULTIMATECUT Taper and deburring countersinker DIN 335 type C 90° HSSE-Co 5

Arbor holder including pilot drill

Replacement bolt MF 8 x 1,0 x 40

ULTIMATECUT Taper and deburring countersinker set (DIN 335) type C 90° HSSE-Co 5 in plastic case

Pilot drill HSSE-Co 5

Replacement bolt with ball-bearing MF 10 x 1,0 x 50

Twist drill DIN 338 type VA, HSSE-Co 5 TiAlN

ULTIMATECUT Taper and deburring countersinker DIN 335 type C 90° HSSE-Co 5 RUnaTEC

Arbor holders for tungsten carbide multigrade hole saws

Twist drill set DIN 338 type VA, HSSE-Co 5 TiAlN

ULTIMATECUT Taper and deburring countersinker set (DIN 335) type C 90° HSSE-Co 5 RUnaTEC in plastic case

Arbor holders including pilot drill for bi-metal hole saws

Twist drills DIN 338 type VA HSSE-Co 8

Twist drill set DIN 338 type VA, HSSE-Co 8

Twist drills DIN 338 type VA, HSSE-Co8 TiAlN

Twist drill set DIN 338 type VA, HSSE-Co 8 TiAlN

Twist drill DIN 338 type VA, HSSE-Co 5

Twist drill set DIN 338 type VA, HSSE-Co 5

Twist drill DIN 338 type VA, HSSE-Co 5 in fractional sizes

Twist drill set DIN 338 type VA, HSSE-Co 5 in inch dimensions

Twist drill DIN 338 UTL 3000, HSSE-Co 5

Twist drill set DIN 338 UTL 3000, HSSE-Co 5

Twist drill DIN 338 UTL 3000, HSSE-Co 5 in fractional sizes

Twist drill set DIN 338 UTL 3000, HSSE-Co 5 in inch sizes

Twist drill DIN 338 UTL 3000, HSSE-Co 5 TiAlN

Twist drill sets DIN 338 UTL 3000, HSSE-Co 5 TiAlN

Twist drill DIN 338 TL 3000, HSS-G

Twist drill set DIN 338 TL 3000, HSS-G

Twist drill DIN 338 TL 3000, HSS-G in fractional sizes

Twist drill set DIN 338 TL 3000, HSS-G in inch sizes

Twist drill DIN 338 TL 3000, HSS-G TiN

Twist drill set DIN 338 TL 3000, HSS-G TiN

Twist drill DIN 338 TL 3000, HSS-G TiN in fractional sizes

Twist drill set DIN 338 TL 3000, HSS-G TiN in inch dimensions

Twist drill DIN 338 TL 3000, HSS-G TiAlN

Twist drill set DIN 338 TL 3000, HSS-G TiAlN

Twist drill DIN 338 TL 3000, HSS-G TiAlN in fractional sizes

Twist drill set DIN 338 TL 3000, HSS-G TiAlN in inch dimensions

Twist drill DIN 338 type N, HSS-G in fractional sizes

Twist drill set DIN 338 type N, HSS-G in inch sizes

Twist drill DIN 338 type N, HSS-G TiN

Twist drill set DIN 338 type N, HSS-G TiN

Twist drill DIN 338 type N, HSS-G TiN in fractional sizes

Twist drill set DIN 338 type N, HSS-G TiN in inch dimensions

Twist drill DIN 338 type N, HSS-G with TiN-coated tips

Twist drill set DIN 338 type N, HSS-G with TiN-coated tips

Twist drill DIN 338 type N, HSS-G - left hand cutting

Twist drill set DIN 338 type N, HSS-G - left hand cutting

Twist drill DIN 338 type N, HSS rolled

Twist drill set DIN 338 type N, HSS rolled

Twist drill DIN 338 type N, HSS rolled with reduced shank

Twist drill DIN 338 type N, HSS-G with reduced shank

Spiralbohrer DIN 338 Typ N, HSS mit abgesetztem Schaft im Magazin

Twist drill DIN 338 type N, HSSE-Co 5 with reduced shank

Solid TC twist drills DIN 338 type N, TiAlN

Twist drill DIN 338 type N, with brazed-on TC cutting inserts

Twist drill set DIN 338 type N, with brazed-on TC cutting inserts

Twist drill DIN 338 type N, with brazed-on TC cutting inserts, Tecrona

Twist drill set DIN 338 type N, with brazed-on TC cutting inserts, Tecrona

Twist drill DIN 340 TL 3000, HSSE-Co 5

Twist drill DIN 340 TL 3000, HSSE-Co 5 TiAlN

Twist drill DIN 340 type N, HSS-G

Twist drill DIN 340 type N, HSS-G TiN

Twist drill DIN 1869 TL 3000, HSS-G - extra long

Twist drill DIN 345 type N, HSS

Twist drill DIN 345 type N, HSSE-Co 5

Twist drill DIN 345 type N, HSSE-Co 5 TiN

Twist drill DIN 1897 type N, HSS-G - short

Twist drill DIN 1897 type N, HSS-G TiN - short

Twist drill DIN 1897 type N, HSSE-Co 5 - short

Twist drill DIN 1897 type N, HSSE-Co 5 TiAlN - short

Centre drills DIN 333, HSS ground - shape A

Centre drills DIN 333, HSS ground - shape A with reinforcing bead

Centre drills DIN 333, HSS ground - shape R

Spot drills type N, HSS ground - extra short

Double end drills type KV, HSS ground

Spot weld miller HSS

Spot weld miller set HSS

Weld point drill Fast Cut HSSE-Co 5

Weld point drill Fast Cut HSSE-Co 5 TiCN

Weld point drill Fast Cut Tungsten-carbide AlTiN

Weld point drill Spotle Drill HSSE-Co 5

Weld point drill Spotle Drill HSSE-Co 5 TiCN

Milling Drill HSS

Milling Drill HSS-TiN

Tube and sheet drill HSS, CBN ground with split point

Tube and sheet drill set HSS

Tube and sheet drill HSS-TiN, CBN ground with split point

Tube and sheet drill set HSS-TiN

Tube and sheet drill HSSE-Co 5, CBN ground with split point

Tube and sheet drill set HSSE-Co 5

Tube and sheet drill bit HSS, 1/4", CBN ground with split point

Tube and sheet drills HSS with stopper and spot facer for cavity sealing, CBN ground with split point

ULTIMATECUT step drill HSS RUnaTEC with FLOWSTEP® tip

ULTIMATECUT step drill bit set HSS RUnaTEC with FLOWSTEP® tip

Step drill HSS, spiral fluted with split point

Step drill set HSS spiral fluted

Step drill set HSS spiral fluted, sizes 0/9, 1, 2 in REPACK by RUKO - 3 pcs

Step drill HSS, fractional sizes, spiral fluted with split point

Step drill HSS-TiN, spiral fluted with split point

Step drill set HSS-TiN spiral fluted

Step drill set HSS-TiN spiral fluted, sizes 0/9, 1, 2 in REPACK by RUKO - 3 pcs

Step drill HSS-TiN, fractional sizes, spiral fluted with split point

Step drill HSS-TiAlN, spiral fluted with split point

Step drill set HSS-TiAlN spiral fluted

Step drill set HSS-TiAlN spiral fluted, sizes 0/9, 1, 2 in REPACK by RUKO - 3 pcs

Step drill HSS-TiAlN, fractional sizes, spiral fluted with split point

Step drill HSSE-Co 5, spiral fluted with split point

Step drill set HSSE-Co 5 spiral fluted

Step drill set HSSE-Co 5 spiral fluted, sizes 0/9, 1, 2 in REPACK by RUKO - 3 pcs

Step drill HSSE-Co 5, fractional sizes, spiral fluted with split point

Crash barrier step drill HSS-TiAlN spiral fluted with split point

Step drill bit HSS, spiral fluted with split point

Step drill bit HSS-TiN, spiral fluted with split point

Step drill HSS, CBN ground,spiral fluted with split point, short design

Step drills HSS, CBN ground with 3 cutting edges

Step drill set HSS, with 3 cutting edges

Step drills HSS, spiral fluted with split point for metric cable connections

Step drills HSS-TiN, spiral fluted with split point for metric cable connections

Step drills HSS-TiAlN, spiral fluted with split point for metric cable connections

Step drills HSS without point

ULTIMATECUT Taper and deburring countersinker set (DIN 335) type C 90° HSS in REPACK by RUKO - 6 pcs.

ULTIMATECUT Taper and deburring countersinker set DIN 335 type C 90° HSS RUnaTEC in REPACK by RUKO - 6 pcs.

ULTIMATECUT Taper and deburring countersinker set DIN 335 type C 90° HSSE-Co 5 in REPACK by RUKO - 6 pcs.

ULTIMATECUT Taper and deburring countersinker set (DIN 335) type C 90° HSSE-Co 5 RUnaTEC in REPACK by RUKO - 6 pcs.

Taper and deburring countersinkers DIN 335 type C 90° HSS

Taper and deburring countersinker set DIN 335 type C 90° HSS

Taper and deburring countersinker set DIN 335 type C 90° HSS in REPACK by RUKO - 6 pcs.

Taper and deburring countersinkers DIN 335 type C 90° HSS - for aluminium

Taper and deburring countersinker set DIN 335 type C 90° HSS for aluminium

Taper and deburring countersinkers DIN 335 type C 90° HSS-TiN

Taper and deburring countersinker set DIN 335 type C 90° HSS-TiN

Taper and deburring countersinker set DIN 335 type C 90° HSS-TiN in REPACK by RUKO - 6 pcs.

Taper and deburring countersinkers DIN 335 type C 90° HSS-TiAlN

Taper and deburring countersinker set DIN 335 type C 90° HSS-TiAlN

Taper and deburring countersinker set DIN 335 type C 90° HSS-TiAlN in REPACK by RUKO - 6 pcs.

Taper and deburring countersinkers DIN 335 type C 90° ASP

Taper and deburring countersinker set DIN 335 type C 90° ASP in steel case

Taper and deburring countersinkers DIN 335 type C 90° HSSE-Co 5

Taper and deburring countersinker set DIN 335 type C 90° HSSE-Co 5

Taper and deburring countersinker set DIN 335 type C 90° HSSE-Co 5 in REPACK by RUKO - 6 pcs.

Taper and deburring countersinkers DIN 335 type C 90° - Tungsten carbide

Taper and deburring countersinker set DIN 335 type C 90° tungsten carbide in steel case - 6 pcs.

Taper and deburring countersinkers DIN 335 type C 90° HSS, with long cylindrical shank

Taper and deburring countersinker set DIN 335 type C 90° HSS, with long cylindrical shank in plastic case

Taper and deburring countersinkers DIN 335 type D 90° HSS

Taper and deburring countersinker type C 82° HSS, inch size

Taper and deburring countersinker set type C 82° HSS, inch size, in plastic case - 5 pcs.

Taper and deburring countersinker DIN 334 type C 60° HSS

Taper and deburring countersinker DIN 334 type D 60° HSS

Taper and deburring countersinker type C 75° HSS

Taper and deburring countersinker type D 75° HSS

Taper and deburring countersinker type C 120° HSS

Taper and deburring countersinker type D 120° HSS

Taper and deburring countersinker type C 90° HSS with one cutting edge

Slotted taper and deburring countersinker 90° HSS

Slotted taper and deburring countersinker set 90° HSS

Slotted taper and deburring countersinker 90° HSS-TiN

Slotted taper and deburring countersinker set 90° HSS-TiN

Slotted taper and deburring countersinker 90° HSSE-Co 5

Slotted taper and deburring countersinker set 90° HSSE-Co 5

Taper and deburring countersinker bit 90° "short" HSS

Taper and deburring countersinker bit set 90° "short" HSS

Taper and deburring countersinker bit 90° "short" HSS-TiN

Taper and deburring countersinker bit set 90° "short" HSS-TiN

Taper and deburring countersinker bit 90° "long" HSS

Taper and deburring countersinker bit set 90° "long" HSS

Taper and deburring countersinker bit 90° "long" HSS-TiN

Taper and deburring countersinker bit set 90° "long" HSS-TiN

Flat countersinkers DIN 373 HSS with fixed guide

Flat countersinker set DIN 373 HSS with straight shank and fixed pilot

Flat countersinkers DIN 373 HSS-TiN with fixed guide

Flat countersinker set DIN 373 HSS-TiN with straight shank and fixed pilot

Flat countersinkers HSS with morse taper and fixed guide

Subland drills "long" type N HSS

Subland drills "long" type N HSS - 180°

Subland drills "long" type N HSS - 90°

Subland drills "short" type N HSS - 90°

Subland drills "short" type N HSS - 180°

Subland drills "short" type N HSS - 90°

Hand deburrer with countersinker

Universal handle for countersinker

Hand tap M 352 HSS, ground - 3 pcs.

Hand tap M DIN 352 HSS, ground

Hand tap M 352 HSSE-Co 5, ground - 3 psc.

Hand tap M IN 352 HSSE-Co 5, ground

Hand tap M 352 HSS-left-handed thread, ground - 3 pcs.

Hand tap M DIN 352 HSS-left-handed thread, ground

Hand tap MF DIN 2181 HSS, ground - 2 pcs.

Hand tap MF DIN 2181 HSS, ground

Hand tap G DIN 5157 HSS, ground - 2 pcs.

Hand tap G DIN 5157 HSS, ground

Hand tap BSW ≈ 352 HSS, ground - 3 psc.

Hand tap BSW ≈ 352 HSS, ground

Hand tap UNC ≈ 352 HSS, ground - 3 psc.

Hand tap UNC ≈ 352 HSS, ground

Hand tap UNF ≈ DIN 2181 HSS, ground - 2 pcs.

Hand tap UNF ≈ DIN 2181 HSS, ground

Single-cut tap M ≈ 352 HSSE-Co 5 ground

Single-cut tap NPT HSS, ground

Single-cut tap G ≈ DIN 5157 HSS, ground

Single-cut taps HSS ground - ProCoil

Extension sleeves DIN 377

Adjustable tap wrench DIN 1814

Ball tap wrenches

Tap wrench with ratchet

Round die M DIN EN 22568 HSS, ground

Round die M DIN EN 22568 HSSE-Co5, ground

Round die M DIN EN 22568 HSS-left-handed thread, ground

Round die MF DIN EN 22568 HSS, ground

Round die G DIN EN 24231 HSS, ground

Round die BSW ≈ DIN EN 22568 HSS, ground

Round die UNC ≈ DIN EN 22568 HSS, ground

Round die UNF ≈ DIN EN 22568 HSS, ground

Hexagonal solid square bolt die M DIN 382 HSS, ground

Hexagonal solid square bolt die G DIN 382 HSS, ground

Die stocks DIN 225

Machine tap M DIN 371 HSS, ground

Machine tap M DIN 371 HSS-TiN, ground

Machine tap M DIN 371 HSSE-Co 5, ground

Machine tap M DIN 371 HSSE-Co 5 VAP, ground

Machine tap M DIN 371 HSSE-Co 5 TiAlN, ground

Machine tap M DIN 371 HSS, ground

Machine tap M DIN 371 HSS-TiN, ground

Machine tap M DIN 371 HSSE-Co 5, ground

Machine tap M DIN 371 HSSE-Co 5 VAP, ground

Machine tap M DIN 371 HSSE-Co 5 TiAlN, ground

Machine tap M DIN 376 HSS, ground

Machine tap M DIN 376 HSS-TiN, ground

Machine tap M DIN 376 HSSE-Co 5, ground

Machine tap M DIN 376 HSSE-Co 5 VAP, ground

Machine tap M DIN 376 HSSE-Co 5 TiAlN, ground

Machine tap M DIN 376 HSS, ground

Machine tap M DIN 376 HSS-TiN, ground

Machine tap M DIN 376 HSSE-Co 5, ground

Machine tap M DIN 376 HSSE-Co 5 VAP, ground

Machine tap M DIN 376 HSSE-Co 5 TiAlN, ground

Machine tap M DIN 371 HSS, ground, with interrupted threads

Machine tap M DIN 376 HSS, ground, with interrupted threads

Machine tap M DIN 371 HSSE-Co 5 TiCN, ground

Machine tap M DIN 376 HSSE-Co 5 TiCN, ground

Machine tap G DIN 5156 HSSE-Co 5, ground

Machine tap G DIN 5156 HSSE-Co 5, ground

Machine tap MF DIN 374 HSSE-Co 5, ground

Machine tap MF DIN 374 HSSE-Co 5, ground

Machine tap UNC DIN 2182 HSSE-Co 5, ground

Machine tap UNC DIN 2182 HSSE-Co 5, ground

Machine tap UNF DIN 2182 HSSE-Co 5, ground

Machine tap UNF DIN 2182 HSSE-Co 5, ground

Machine tap PG HSS, ground

Nut tap M DIN 357 HSS, ground

Forming tap DIN 2174 HSS Co 5-nitrated-VAP, ground

Forming tap DIN 2174 HSS Co 5-TiAlN ground

Combined machine tap bit "short" HSS, ground

Combined machine tap bit "short" HSS-TiN, ground

Combined machine tap bit "long" HSS, ground

Combined machine tap bit "long" HSS-TiN, ground

Magnetic bit holder for ¼” hexagonal shank tools

Machine tap sets HSS - 7 pcs.

Machine tap set HSS in REPACK by RUKO - 7 pcs.

Machine tap set HSS - 14 pcs.

Machine tap set HSS TiN, 7-pieces

Machine tap set HSSE-Co 5, 7-pieces

Machine tap set HSSE-Co 5 in REPACK by RUKO - 7 pcs.

Machine tap set HSSE-Co 5 - 14 pcs.

Machine tap set HSSE-Co 5 - 21 pcs.

Machine tap set HSSE-Co 5 VAP, 7 pieces

Machine tap set HSSE-Co 5 TiAlN, 7-pieces

Machine tap set HSS + ULTIMATECUT twist drills DIN 338 type FLOWSTEP® HSS in plastic case

Machine tap set HSSE-Co 5 + ULTIMATECUT twist drills DIN 338 type FLOWSTEP® HSSE-Co 5 in plastic case

Combined machine tap set "long" HSS in steel case

Combined machine tap set "short" HSS in steel case

Combined machine tap set "long" HSS-TiN in steel case

Combined machine tap set "short" HSS-TiN in steel case

Thread Inserts - 50 pcs.

Pin breaker

Fitting tools

Studs

Extractor nut

Drilling jig

ProCoil Thread repairing set in plastic case

Thread-extractor set in plastic case

Solid drills „Solid 3S“ with weldon shank (3/4"), CBN ground and 3 cutting edges, 30.0 mm

Core drill HSS with weldon shank (3/4"), 30.0 mm

Core drill HSS-TiAlN with weldon shank (3/4"), 30.0 mm

Core drill HSSE-Co 5 with weldon shank (3/4"), 30.0 mm

Core drill with tungsten-carbide cutting edges and Weldon shank (3/4") for railway tracks, 30.0 mm

Core drill with tungsten-carbide cutting edges and Weldon shank (3/4") for railway tracks - Tecrona, 30.0 mm

Core drills HSSE-Co 5 with Quick IN-shank, 35.0 mm

Core drill with tungsten-carbide cutting edges and weldon shank (3/4"), 50.0 mm

Core drill with tungsten-carbide cutting edges and weldon shank (3/4") - Tecrona, 50.0 mm

Core drill with tungsten-carbide and Quick IN-shank, 50.0 mm

Core drill with tungsten-carbide and Quick IN-shank - Tecrona, 50.0 mm

Core drill with tungsten-carbide cutting edges and threaded retainer, 50.0 mm

Core drill with tungsten-carbide cutting edges and threaded retainer - Tecrona, 50,0 mm

Core drill HSS with weldon shank (3/4"), 55.0 mm

Core drill HSS-TiAlN with weldon shank (3/4"), 55.0 mm

Core drill HSSE-Co 5 with weldon shank (3/4"), 55.0 mm

Core drill HSS with weldon shank (3/4"), 110.0 mm

Core drill HSS-TiAlN with weldon shank (3/4"), 110.0 mm

Ejector pin for core drills HSS with Weldon shank (¾")

Ejector pin for core drills HSS / TC with Quick IN-shank

Core drill set HSS with Weldon shank (3/4"), cutting depth 30.0 mm

Set of core drills HSSE-Co 5 with weldon shank (3/4")

Set of core drills with tungsten-carbide cutting edges and Quick IN-shank

Tungsten carbide rotary burr shape A cylinder (ZYA) without end toothing

Tungsten carbide rotary burr shape A cylinder (ZYA) without end toothing - TiCN coating

Tungsten carbide rotary burr shape A cylinder (ZYAS) with end toothing - with aluminium toothing

Tungsten carbide rotary burr shape A cylinder (ZYAS) with end toothing

Tungsten carbide rotary burr shape A cylinder (ZYAS) with end toothing - TiCN coating

Tungsten carbide rotary burr shape C oval (WRC) - with aluminium toothing

Tungsten carbide rotary burr shape C oval (WRC)

Tungsten carbide rotary burr shape C oval (WRC) - TiCN coating

Tungsten carbide rotary burr shape D ball type (KUD) - with aluminium toothing

Tungsten carbide rotary burr shape D ball type (KUD)

Tungsten carbide rotary burr shape D ball type (KUD) - TiCN coating

Tungsten carbide rotary burr shape E tear drop (TRE)

Tungsten carbide rotary burr shape F ball nose tree (RBF) - with aluminium toothing

Tungsten carbide rotary burr shape F ball nose tree (RBF)

Tungsten carbide rotary burr shape F ball nose tree (RBF) - TiCN coating

Tungsten carbide rotary burr shape G tree (SPG) - with aluminium toothing

Tungsten carbide rotary burr shape G tree (SPG)

Tungsten carbide rotary burr shape G tree (SPG) - TiCN coating

Tungsten carbide rotary burr shape H flame (FLH)

Tungsten carbide rotary burr shape J cone 60° (KSJ)

Tungsten carbide rotary burr shape K cone 90° (KSK)

Tungsten carbide rotary burr shape L round cone (KEL) - with aluminium toothing

Tungsten carbide rotary burr shape L round cone (KEL)

Tungsten carbide rotary burr shape M cone (SKM)

Tungsten carbide rotary burr shape M cone (SKM) - TiCN coating

Tungsten carbide rotary burr shape N angle (WKN)

Set of tungsten carbide rotary burrs ALU

Set of tungsten carbide rotary burrs TC

T-shank jig-saw blades HCS

Jigsaw blade RUKO HSS bimetal

T-shank jig-saw blades HSS steel

Jig-saw blades for pneumatic body saws HSS-bi-metal

Reciprocating blades HCS

Reciprocating blades HSS bi-metal

Reciprocating blade tungsten carbide

Hacksaw blade HSS-Co Bihart cobalt

Hacksaw blade HSS bi-flexible

Compact 33 hacksaw frame

Unigrat „Universal Handle”

Unigrat blades

Unigrat steel holder

Rapid deburrer with HSS blade

Double deburrer with HSS disk blades

Tube deburrer with HSS cutting edges

Unigrat set